YASKAWA CIPR-GA50C Serie Manual De Instrucciones página 356

10 Attachment
The value set for E2-01 becomes the reference value for motor protection and the torque
limit. Enter the motor rated current written on the motor nameplate. Auto-Tuning the
drive will automatically set E2-01 to the value input for T1-04 [Motor Rated Current].
E5-03: Motor Rated Current (FLA)
No.
Name
(Hex.)
E5-03 Motor Rated
Current (FLA)
(032B)
Note:
When the drive model changes, the display units for this parameter also change.
• 0.01 A: B001 - B018, 2001 - 2042, 4001 - 4023
• 0.1 A: 2056 - 2082, 4031 - 4060
The drive automatically sets E5-03 to the value input for T2-06 [PM Motor Rated
Current] after you do these types of Auto-Tuning:
• PM Motor Parameter Settings
• PM Stationary Auto-Tuning
• PM Stationary Tuning for Stator Resistance
• PM Rotational Auto-Tuning
E9-06: Motor Rated Current (FLA)
No.
Name
(Hex.)
E9-06 Motor Rated
Current (FLA)
(11E9)
Note:
When the drive model changes, the display units for this parameter also change.
• 0.01 A: B001 to B018, 2001 to 2042, 4001 to 4023
• 0.1 A: 2056 to 2082, 4031 to 4060
The setting value of E9-06 is the reference value for motor protection. Enter the motor
rated current written on the motor nameplate. Auto-Tuning the drive will automatically set
E9-06 to the value input for T4-07 [Motor Rated Current].
356
Description
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
Sets the PM motor rated current (FLA).
Description
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
Sets the motor rated current in amps.
YASKAWA TOMPC7106173UA GA500 Installation and Operation Instruction
Default
(Range)
Determined by
o2-04, C6-01
(10% to 200% of
the drive rated
current)
Default
(Range)
Determined by
E9-01 and o2-04
(10% to 200% of
the drive rated
current)