Spare And Wearing Parts; Change Of Location; Disposal And Scrapping; Substances Hazardous To Water - Bosch 1 687 010 182 Instrucciones De Funcionamiento

6.4

Spare and wearing parts

Description
CP 3 drive flange M14x1.5
CP 3 drive flange M18x1.5
CP 3 Oldham drive flange with connec-
tion piece F 00N 204 135
Connection piece for drive flange
1 685 702 090
<)
CP3.X clamping flange set
<)
Adapter ring ID 50 mm (for use in con-
junction with CP 3.X clamping flange
1 685 720 294)
Reducing ring ID 50 + 70 mm (to be used
in conjunction with CP 3.X clamping
flange 1 685 720 294)
Adapter ring ID 60 mm (for use in con-
junction with CP 3.X clamping flange
1 685 720 294)
Reducing ring ID 50 + 69 mm (to be used
in conjunction with CP 3.X clamping
flange 1 685 720 294)
CP 3.3 clamping flange
<)
CP 3.4 clamping flange
<)
Threaded union AD 10 for clamping flange
1 685 720 258
<)
Threaded union AD 15 for clamping flange
1 685 720 258
<)
O-ring Ø10 x 3 for clamping flange
1 685 720 258
<)
O-ring dia. 38.7 x 2.65 for clamping flange
1 685 720 258
<)
CP 3.3 Cummins reducing ring
CP 3.3 Otosan spacer ring
<)
Connection adapter
O-ring dia. Ø8 x 2,5 mm for connection
adapter 1 683 386 133
<)
Retaining plate for connection adapter
1 683 386 133
Hose AD 10 x 1350 mm for lubricating oil
inlet
<)
Hose AD 15 x 700 mm
<)
Hose AD 15 x 600 mm
<)
Hose AD15 x 1100 mm
<)
for return connection
Pressure hose ID8 x 4000
<)
PVC hose (ID8 x 4500 mm)
Batching unit
<)
AD = Outside diameter
ID =Inside diameter
= Wearing parts
<)
Robert Bosch GmbH
Order number
1 685 702 082
1 685 702 088
1 685 702 090
F 00N 204 135
1 685 720 309
1 680 103 111
1 680 103 112
1 680 103 606
1 680 103 610
1 680 720 312
1 680 720 258
1 683 391 221
1 683 391 152
1 687 001 627
1 900 210 450
1 680 103 115
<)
1 680 103 116
1 683 386 133
1 900 210 105
1 685 200 116
1 680 711 112
1 680 712 202
1 680 711 093
1 680 712 233
1 687 001 851
1 680 707 089
1 683 391 223
Maintenance | 1 687 010 182 | 25
7. Decommissioning
7.1

Change of location

¶
If the 1 687 010 182 is passed on, all the documenta-
tion included in the scope of delivery must be handed
over together with the unit.
¶
The 1 687 010 182 is only ever to be transported in
the original or equivalent packaging.
7.2

Disposal and scrapping

7.2.1

Substances hazardous to water

!
Oils and greases as well as refuse containing oil and
grease (e.g. filters) represent a hazard to water.
1. Substances hazardous to water must not be allowed
to enter the sewage system.
2. Substances hazardous to water must be disposed of
in accordance with the applicable regulations.
!
Test oil as per ISO 4113 is classified under used oil
iicollection category 1. In category 1, the used oil
must not contain any foreign substances such as
used oils of a different category, gasoline or diesel
fuel. The corresponding refuse code number can be
taken from the safety data sheet of the test oil.
7.2.2 1 687 010 182 and accessories
¶
Dismantle the 1 687 010 182 and sort out and
dispose of the different materials in accordance with
the applicable regulations.
en
|
1 689 989 055 2015-10-01