Product Description; Operating Requirements - Bosch 1 687 010 182 Instrucciones De Funcionamiento

3.

Product description

3.1 Use
This accessory set contains clamping accessories and
connection accessories for testing Bosch common rail
pumps CP 3.X (referred to in the following as pump)
with the CRS 845 / CRS 845H tester set.
These instructions are only valid in combination with
the existing instructions and they must be stored
and distributed with them. Refer to the "General
information" for the EPS 815 injection pump test
bench, the KMA 802 electronic metering system and the
CRS 845 / CRS 845H tester set in the corresponding
operating instructions.
3.2

Operating requirements

R
CRS 845 / CRS 845H tester set
R
EPS 945 software version >1.60
Robert Bosch GmbH
Product description | 1 687 010 182 | 17
3.3 Deliverables
Designation
CP 3 drive flange M14x1,5
CP 3 drive flange M18x1,5
CP 3 drive flange, Oldham with
coupling element
CP 3.X clamping flange set
Content:
clamping flange 1 685 720 294
Adapter ring 1 680 103 111
Adapter ring 1 680 103 112
Adapter ring 1 680 103 606
Adapter ring 1 680 103 610
Parts set CP 3.4
Scope of delivery:
CP 3.4 clamping flange 1 685 720 258
Mounting accessories for clamping flange
1 685 720 258
Hose 1 680 711 112 (OD10 x 1350 mm)
Hose 1 680 712 233 (OD15 = 1100 mm)
Hose 1 680 712 202 (OD15 = 700 mm)
PVC hose (l = 900 mm)
Accessories and small parts for connecting
the common rail pump
CP 3.3 clamping flange
Adapter ring for CP 3.3 Cummins
(for use in conjunction with
clamping flange 1 685 720 258 or
clamping flange 1 685 720 312)
Spacer ring for CP 3.3 for Otosan
(for use in conjunction with CP 3.4 clamp-
ing flange 1 685 720 258)
Pressure gauge 0 – 600 kPa
Pressure gauge -100 kPa – 250 kPa
Metering unit (ZME)
Restrictor parts set
Hose dia. OD 15 x 600 mm
Pressure hose ID8 x 4000 mm
Connection adapter (4 Stück)
O-ring dia. 8 x 2.5 (4x) for connection adapt-
er 1 683 386 133
Retaining plate (4x) for connection adapter
1 683 386 133
Miscellaneous accessories/incidentals for
CP connection
Software CD-TestData
ID =Inside diameter
OD = Outside diameter
Cannot be ordered. item number for identification purposes
1)
only.
en
Oreder number
1 685 702 082
1 685 720 088
1 685 702 090
1 685 720 309
1)
1 687 016 063
1 685 720 312
1 680 103 115
1 680 103 116
1 687 231 251
1 687 231 252
1 683 391 223
1 687 001 581
1 680 711 093
–
1 683 386 133
1 900 210 105
1 685 200 116
–
1 687 370 270
|
1 689 989 055 2015-10-01