Introduction; Transport, Storage And Handling - SICE S 63 Manual De Instrucciones

INTRODUCTION

The purpose of this manual is to provide the
owner and operator with effective and safe
instructions for the use and maintenance
of the wheel balancer.
Follow all of the instructions carefully and
your machine will assist you in your work
and give long-lasting and efficient service,
in keeping with manufacturer traditions.
The following paragraphs define the levels
of danger regarding the machine, associ-
ated with the warning captions found in
this manual.
DANGER
Refers to immediate danger with the risk
of serious injury or death.
WARNING
Dangers or unsafe procedures that can
cause serious injury or death.
WARNING
Dangers or unsafe procedures that can cause
minor injuries or damage to property.
Read these instructions carefully before
starting the machine. Keep this manual
and all illustrative material supplied with
the machine in a folder near it where it is
readily accessible for consultation by the
operators.
The technical documentation supplied is
considered an integral part of the machine;
in the event of sale all relative documenta-
tion must remain with the machine.
The manual is only valid for the machine
model and serial number indicated on the
nameplate applied to the machine itself.
WARNING
Adhere to the contents of this manual: The
producer declines all liability in the case
of actions not specifically described and
authorised in this manual.
42
NOTE
Some of the illustrations contained in this
manual were derived from photos of pro-
totypes: the standard production machines
may differ in some details.
These instructions are for the attention of
personnel with basic mechanical skills. We
have therefore condensed the descriptions
of each operation by omitting detailed
instructions regarding, for example, how to
loosen or tighten the fixing devices on the
machine. Do not attempt to perform opera-
tions unless properly qualified and with
suitable experience. If in need of assistance,
call an authorised assistance centre.
TRANSPORT,
STORAGE AND
HANDLING
The basic wheel balancer packaging con-
sists of 1 cardboard crate containing:
- the wheel balancer (Fig.7);
- the external sensor (if present) and the
equipment;
- the wheel guard (if present) and correspond-
ing mounting tube (C, fig.4a - D, fig. 4a).
Before installation, the wheel balancer must
be shipped in its original packaging, making
sure that the machine is maintained in the
position indicated on the outer packaging.
The machine can be moved by placing the
packaging on a wheeled trolley or inserting
the forks of a fork lift truck in the relative
slots in the pallet (Fig. 1).
- Packaging dimensions:
Length: 1150 mm
Depth: 990 mm
Height: 1175 mm
Packaging weight: 30 kg
- Machine weight:
version with guard: 120 kg
version without guard:110 kg
User manual S 63