Unbalance Visualisation In Grammes/Ounces; Rounding-Off - SICE S 63 Manual De Instrucciones

limetres by pressing the
for five seconds.
- Values set previously can be increased or
decreased quickly by keeping the keys
pressed.
- Press the
previous value and set the machine for
diameter data entry.
- Read the rated rim diameter value on
the tyre.
- Modify the displayed diameter value by
pressing the
read number is set. The diameter can be
set in millimetres or the values already
set can be converted from inches to mil-
limetres by pressing the
for five seconds.
- Press the
previous value and set the machine for
distance data entry.
- Bring the distance measuring arm into
contact with the inner side of the rim (Fig.
10/10a).
- Read the wheel/body distance on the rule
(A, Fig.11a).
User manual S 63
button
key to confirm the
keys until the
button
key to confirm the
- Modify the displayed distance value by
pressing the
read number is set.
- On completion, press
the unbalance values recalculated on the
basis of the new dimensions, or lower the
guard or press
spin.
UNBALANCE
VISUALISATION IN
GRAMMES/OUNCES
The setting for the visualisation of the
unbalance values in grammes or ounces is
made by keeping the key
for about five seconds.

ROUNDING-OFF

When started up, the machine is set to
display the unbalance values at five-gramme
increments, i.e. rounded to the nearest
multiple of five (or quarters of an ounce if
visualised in ounces).
11a
keys until the
to display
to perform a wheel
pressed
55