Standard Accessories; Optional Accessories; General Conditions Of Use - SICE S 63 Manual De Instrucciones

122 kg.
- Machine weight without guard (without
accessories) and without the external
sensor: 112 kg.
- Machine weight with guard (without acces-
sories) with the external sensor: 130 kg.
- Machine weight without the guard (without
accessories) with the external sensor: 120 kg.
- Operating noise level: <70 dB(A).
STANDARD
ACCESSORIES
The following parts are supplied together
with the machine.
- Threaded hub
- Calliper for wheel width measurement
- 6 mm hex wrench
- 10 mm hex wrench
- Calibration weight
- Power cable
- Small cone
- Medium cone
- Large cone
- Small wheel fixing cap protection
- Spacer cap
- Small wheel fixing cap
- Wheel fixing quick ring nut
- Tool for removing the adhesive weights
- Fischer M8 for locking the machine to
the ground
- Ground fixing brackets
OPTIONAL
ACCESSORIES
Please refer to the relevant accessories
catalogue.
GENERAL
CONDITIONS OF USE
The equipment is intended for professional
use only.
52
WARNING
Only one operator at a time can work with
the machine.
The wheel balancers described in this
manual must be used exclusively to
measure the extent and position of car
wheel unbalances, within the limits speci-
fied in the Technical specification section.
Furthermore, models equipped with motors
must be provided with a suitable guard,
fitted with a safety device, which must be
lowered during the spin operation.
WARNING
Any use of the machine other than the
described use is to be considered as
improper and unreasonable.
WARNING
Do not start the machine without the wheel
locking equipment.
WARNING
Do not use the machine without the guard
and do not tamper with the safety device.
WARNING
Do not clean or wash the wheels mounted
on the machine with compressed air or
jets of water.
WARNING
When working, never use equipment not
manufactured by the manufacturer.
WARNING
Get to know your machine: The best way to
prevent accidents and obtain top perform-
ance from the machine is to ensure that all
operators know how the machine works.
Learn the function and location of all the
controls.
Carefully check that all controls on the
machine are working properly.
User manual S 63