Key To Caution And Instruction Labels; Main Features - SICE S 63 Manual De Instrucciones

safety regulations. Operators are expressly
forbidden from using the machine under
the influence of alcohol or drugs capable of
affecting physical and mental capacity.
The following conditions are essential:
- read and understand the information and
instructions described in this manual;
- have a thorough knowledge of the features
and characteristics of the machine;
- keep unauthorised persons well clear of
the working area;
- make sure that the machine has been
installed in compliance with all relevant
standards and regulations in force;
- make sure that all machine operators are
suitably trained, that they are capable of using
the machine correctly and safely and that they
are adequately supervised during work;
- do not touch power lines or the inside
of electric motors or any other electrical
equipment before making sure that they
have been powered off;
- read this booklet carefully and learn how
to use the machine correctly and safely;
- always keep this user manual in a place
where it can be readily consulted and do
not fail to refer to it.
WARNING
Do not remove or deface the DANGER, WARNING,
CAUTION or INSTRUCTION decals.
Replace any missing or illegible decals. If
one or more decals have been detached
or damaged, they can be replaced by your
nearest manufacturer dealer.
- When using and carrying out mainte-
nance on the machine, observe the unified
industrial accident prevention regulations
for high voltage industrial equipment and
rotating machinery.
- Any unauthorised alterations made to
the machine automatically release the
manufacturer from any liability in the case
of damage or accidents as a result of such
alterations. Specifically, tampering with or
removing the machine's safety devices is
User manual S 63
a breach of the regulations for industrial
accident prevention.
WARNING
During work and maintenance opera-
tions, always tie back long hair and do
not wear loose clothing, ties, necklaces,
wristwatches or any other items that may
get caught up in the moving parts.
Key to caution and instruction
labels
Never use the wheel spin
shaft as a lifting point for
the machine.
Unplug the power supply
plug before performing any
maintenance/repair opera-
tions on the machine.
Do not lift up the guard
when the wheel is turning.
Please use centring acces-
sories with hole diameter
40 mm.

MAIN FEATURES

Low balancing speed:
• minimises wheel spin times;
• reduces risk due to rotating parts;
• saves energy.
- Automatic sensor for distance and diam-
eter measurement (if present).
- Automatic sensor for width measurement
(if present).
- Automatic brake for stopping the wheel
at the end of the spin.
- Wheel-holder shaft locking brake.
- STOP button to stop the machine imme-
49