Installation; Important - SICE S 63 Manual De Instrucciones

- The machine must be stored in an environ-
ment meeting the following requirements:
• relative humidity ranging from 20%
to 95%;
• temperature ranging from -10° to +60°C.
WARNING
Do not stack more than two packs to avoid
damaging them.
The machine may be moved after instal-
lation by inserting the forks of a lift truck
under the machine itself, with centre line
between the forks approximately aligned
with the centre line of the body (Fig. 2).
WARNING
Always unplug the power supply cable from
the socket before moving the machine.
WARNING
Never apply force to the wheel spin shaft
when moving the machine.
User manual S 63
1

INSTALLATION

WARNING
Take the utmost care when unpacking,
assembling, lifting and setting up the
machine as indicated below.
Failure to observe these instructions can
damage the machine and compromise the
operator's safety.
Remove the original packaging materials
after positioning them as indicated on the
packaging and keep them intact so the
machine can be safely shipped at a later
date if necessary.
WARNING
The place where the machine is to be
installed must conform to applicable
safety at work regulations.
In particular, the machine must only be
installed and used in protected environ-
ments where there is no risk of anything
dripping onto it.
IMPORTANT: for the correct and safe opera-
tion of the machine, the lighting level in
the place of use should be at least 300 lux.
2
43