Twist Knob; Wireless Temperature Sensor; Maintenance - Gaggenau CI 292 600 Manual De Instrucciones

Ocultar thumbs Ver también para CI 292 600:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Type of Soil
Metal marks: Iridescent stain
Hard water spots:
Hot cooking liquids dripped on surface
Surface scratches:
Small scratches are common and do not affect cooking. They
become smoother and less noticeable with daily use of the
glass ceramic cooktop cleaner.

Twist knob

The twist knob is best cleaned using lukewarm soapy
water. Do not use harsh or abrasive cleaning agents. Do
not clean the twist knob in the dishwater or using
rinsing water. This may damage it.

Wireless temperature sensor

Temperature sensor
Clean with a damp cloth. Never put in the dishwasher,
never get wet.
If the temperature sensor is not used, remove it from the
cookware and keep it in a clean, safe place and not near
heat sources.
Silicone patch
Clean and dry before attaching to the temperature
sensor. Suitable for dishwashers.
Note: Do not leave utensils with the silicone patch in
soapy water for long periods of time.
Possible Solution
Pans with aluminum, copper or stainless steel bases may leave
marks. Treat immediately after surface has cooled with glass
ceramic cooktop cleaner. If this does not remove the marks, try a
mild abrasive (Bon Ami®, Soft Scrub® without bleach) with a
damp paper towel. Rinse and reapply glass ceramic cooktop
cleaner. Failure to remove metal marks before the next heating
makes removal very difficult.
Minerals in some water can be transferred onto the surface and
cause stains. Use undiluted white vinegar, rinse and dry. Recon-
dition with glass ceramic cooktop cleaner. Remove boilovers
and stains before using the cooktop again.
Apply glass ceramic cooktop cleaner before using to remove
sand-like grains and grit such as salt and seasoning. Scratches
can be reduced by using pans with bases that are smooth,
clean, and dry before use. Use recommended glass ceramic
cooktop cleaner daily.
NOTICE: Diamond rings may scratch the surface.
Window of the temperature sensor
The window of the temperature sensor must always be
clean and dry. Proceed as follows here:
Remove dirt and sprayed fat regularly.
For cleaning, use a cloth or q-tips and window
cleaning solution.
Notes
Do not use hard or rough cleansers such as wire
brushes or scourers and abrasive materials.
Do not touch the window of the wireless
temperature sensor with your fingers; this will soil
or scratch it.

Maintenance

This appliance requires no maintenance other than daily
cleaning. For best results, apply cooktop cleaning
cream daily.
41

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

C 292 610

Tabla de contenido