Declaration Of Conformity; Child Lock; Activating And Deactivating The Childproof Lock - Gaggenau CI 292 600 Manual De Instrucciones

3 Put the upper part of the housing and the lower part
of the housing back together. Pay attention to the
correct alignment of the contact pins.
4 Reattach the silicone cover to the lower part of the
housing of the temperature sensor.
Note: Only use high quality batteries type CR2032. They
are exceedingly long-lasting.

Declaration of conformity

Gaggenau Hausgeräte GmbH hereby declares that the
appliance with the wireless temperature sensor function
fulfills the basic requirements and the other applicable
provisions of the directive 1999/5/EU.
A detailed R&TTE declaration of conformity is on the
Internet at www.gaggenau.com on the product page for
your appliance under Additional documents.
The logos and Bluetooth® mark are registered
trademarks and the property of Bluetooth SIG, Inc.; any
use of these marks by Gaggenau Hausgeräte GmbH is
made under license. All other marks and mark names
are the property of the respective companies.
Operation is subject to the following two conditions:
1 this device may not cause interference, and
2 this device must accept any interference, including
interference that may cause undesired operation of
the device.
36

Child lock

You can use the child lock to prevent children from
accidentally turning the cooktop on.
Activating and deactivating the
childproof lock
The cooktop must be switched off.
To activate: Remove the twist knob from the cooktop. A
H
signal sounds. The indicator lights up for
10 seconds. The cooktop is locked.
To deactivate: Place the twist knob on the twistpad.
Note: Removing the twist knob when the cooktop is
switched on initially activates the cleaning protection
display. If the twist knob is not put back on after
10 minutes, the cooktop switches itself off and the child
lock is activated.