Nilfisk Liberty SC50 Instrucciones De Uso página 18

A - ENGLISH
INFORMATION MENU DISPLAY – CONTINUED
Menu visible with either blue (User) or yellow (Supervisor) SmartKey.
Menu Level
1
System
A1 Firmware Rev
A8 Charger F/W
A1 Serial Number
A5 Compute
A5 Platform
A5 Safety
E5 3-D Vision Sensor
2D Mapping Sensor
Impact Log**
CRL Wireless Update**
Network Status
IP Address
QR String
Autonomy
Create Location Tag***
Scan new Location tag***
Delete current tag #NNN***
Delete next seen tag***
Delete this plan***
Change Location Tag
**Only visible with yellow (Supervisor) SmartKey.
***Only visible to blue User key if permission is granted by Supervisor.
A - 18
INSTRUCTIONS FOR USE
2
Display current firmware revision
Display current charger firmware revision
Display PCB serial number from factory
Display current autonomy Compute controller firmware
Display current autonomy Platform controller firmware
Display current autonomy Safety controller firmware
Display current 3-D Vision Sensor firmware
Display current 2D Mapping Sensor firmware
Display list of impact events with max value, timestamp and user id (only if enabled)
- single item view will show max values for each axis (x,y,z)
Go to menu for wireless update of autonomy firmware
Is network up, or down (down includes an error number)
IP Address of machine, shown as 123.456.789.666
QR string scanned in from "Scan QR Code" menu command
Creates the first location tag
Adds a new location tag
Deletes the current tag NNN (deletes all plans associated with the current tag)
Deletes the next tag scanned
Deletes the plan the machine is currently on
Forget the current tag and scan for a known tag
Nilfisk Liberty SC50 - 56091204
Notes
2/2019