Specifications; Accessories / Options; Material Composition And Recyclability; Solution Flow Rates - Nilfisk Liberty SC50 Instrucciones De Uso

A - ENGLISH

SPECIFICATIONS

ACCESSORIES / OPTIONS

In addition to the standard components, the machine can be equipped with the following accessories/options, according to the machine specific use:
Disc Machines
• Brushes with harder or softer bristles
• Pads with more or less abrasiveness
For further information about the above-mentioned accessories, contact an authorized Retailer.

MATERIAL COMPOSITION AND RECYCLABILITY

Type
Aluminum
Electrical / motors / engines - misc.
Ferrous metals
Harnesses / cables
Liquids
Plastic - non-recyclable
Plastic - recyclable
Polyethylene
Rubber

SOLUTION FLOW RATES

Manual Mode
1 bar
0.16 GPM /
20" Disc
0.6 liters/minute
0.13 GPM /
20" REV
0.5 liters/minute
Autonomous
Mode
0.11 GPM /
20" Disc
0.4 liters/minute
0.09 GPM /
20" REV
0.3 liters/minute
* Flow rates are proportional to speed
A - 64
INSTRUCTIONS FOR USE
•
•
Material Composition and Recyclability
% of machine weight
Flow Rates
At Full Manual Speed*
2 bars
0.35 GPM /
1.3 liters/minute
0.18 GPM /
0.7 liters/minute
Flow Rates
At Full Autonomous Speed*
1 bar 2 bars
0.23 GPM /
0.9 liters/minute
0.12 GPM /
0.5 liters/minute
Nilfisk Liberty SC50 - 56091204
REV Machines
Pads with more or less abrasiveness
SPP pads for finish removal
% recyclable
1%
24%
35%
2%
0%
1%
8%
26%
3%
3 bars
0.50 GPM /
1.9 liters/minute
0.23 GPM /
0.9 liters/minute
3 bars
0.33 GPM /
1.3 liters/minute
0.15 GPM /
0.6 liters/minute
100%
80%
100%
90%
0%
0%
100%
100%
100%
2/2019