Class 1 Laser Product - Nilfisk Liberty SC50 Instrucciones De Uso

Ocultar thumbs Ver también para Liberty SC50:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CAUTIONS AND WARNINGS - CONTINUED
CAUTIONS AND WARNINGS SPECIFIC TO 2D MAPPING SENSOR (14)
WARNING!
Risk Of Potential Equalization Currents
The 2D mapping sensor is designed to be operated in a system with professional grounding of all connected devices and
mounting surfaces to the same ground potential. If this condition is not met, potential equalization currents may through
along the cable shields, causing the following hazards:
Dangerous contact voltage on the metal housing
Malfunction or destruction of the TiM
Heating of the cables with possible spontaneous combustion.
CAUTION!

CLASS 1 LASER PRODUCT

The 2D Mapping Sensor corresponds to laser class 1 (eye-safe).
The laser beam is not visible to the human eye.
The use of controls, or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
Do not open the housing (opening the housing will not switch off the laser).
Pay attention to the laser safety regulations as per IEC 60825‑1 (latest version).
2/2019
INSTRUCTIONS FOR USE
56091204 - Nilfisk Liberty SC50
ENGLISH - A
A - 7

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

561045025610450656104508561045035610450756104509

Tabla de contenido