Cursor Measures; Horizontal Cursors - Promax OD-405 Manual De Instrucciones

USER'S MANUAL. OD-405/410B/411/415
11. Press Previous Menu to confirm the item selection and to go back to
the measurement results view.
5.2

Cursor Measures

Cursor lines, horizontal or vertical, show the precise position of the input
waveforms or the math operation results. The horizontal cursors can track
time, voltage/current* and frequency, whilst the vertical cursors can track
voltage/current*. All measurements are updated in real-time.

5.2.1 Horizontal cursors

Measures
To make measures follow these steps:
1. Press Cursor key. The cursors appear in the display.
2. Press X <-
>
3. Press Source repeatedly to select the source channel.
Range: CH1, CH2, MATH
4. The cursor measurement results will appear in the menu, F2 to F4.
Parameters
X1:
X2:
X1X2
∆
: us (OD-411/415)
-uS (OD-405/410B)
f: Hz (OD-411/415)
-Hz (OD-405/410B)
Page 43
Y to select horizontal (X1 & X2) cursors.
Time position of the left cursor.
Time position of the right cursor.
The difference between the X1 and X2.
The time difference between X1 and X2.
The time difference converted to frequency.
11-2011