Data Logging; Overview; Edit: Source; Edit: Setup Parameters - Promax OD-405 Manual De Instrucciones

5.5

Data Logging

5.5.1 Overview

The Data logging function allows you to log data or a screen image over
timed intervals for up to 100 hours to a USB flash drive. The data or images
are stored to a USB flash drive in a directory named LogXXXX. LogXXXX is
incremented each time the data logging function is used.The files saved in the
LogXXXX directory are named DSXXXX.CSV, or DSXXXX.BMP for data or
image files, respectively. At each timed interval data or an image file is saved
and the file number incremented. For example, DS0000 is the first logged
data, DS0001 is the second and so on.

5.5.2 Edit: Source

Procedure
1. Press the Utility key.
2. Press the More key.
3. Press the Data logging Menu key.
4. Press Source repeatedly to select the source channel (CH1 or CH2).

5.5.3 Edit: Setup Parameters

The logging function must set the type of data that will be logged
(waveform/image), the capture interval time and the duration of the data
logging.
1. Press the Utility key.
2. Press the More key.
3. Press the Data logging Menu key.
4. Press the Setup key.
5. Press Save repeatedly to log data or screen images.
6. Press Interval and use the Variable knob to select the interval time.
Interval time
11-2011
2 secs~ 2min (duration = 5 min) 2 secs~ 5 min
(duration 5~ 30 min) 2 secs~ 30 min (duration 30+
min).
USER'S MANUAL. OD-405/410B/411/415
Page 54