Save - Promax OD-405 Manual De Instrucciones

4. Press Function repeatedly to select Save Image or Save All.
5. To invert the color in the display image, press Ink Saver. This turns
Ink Saver on or off.
6. For the OD-411/OD-415 model only. If Save All was selected,
press Mem Leng repeatedly to select USB.
Normal or USB 1M/2M. USB Normal and USB 1M/2M sets the
waveforms to a 4k and 1M/2M memory length when saving,
respectively.
1M memory length is available when both CH1 and CH2 are active;
2M memory length is available when a single channel is active
only.
7. For the OD-411/OD-415 model only. If Save All was selected,
press CSV Format repeatedly to select Fast or Detail. Fast contain
only the amplitude data, whilst Detail contains both amplitude and
time-point data.
8. Press the Hardcopy key. The file or folder will be saved to the root
directory of the USB flash drive.

5.11 Save

This section describes how to save data using the Save/Recall menu.
Item
Panel setup
(xxxx.set)
Waveform data
(xxxx.csv)
Display image
(xxxx.bmp)
Save All
11-2011
Source
• Panel settings
• Channel 1, 2
• Math operation result
• Reference waveform
A, B
• Display image
• Display image
(xxxx.bmp)
• Waveform data
(xxxx.csv)
• Panel settings
(xxxx.set)
USER'S MANUAL. OD-405/410B/411/415
Destination
• Internal memory: S1 ~S15
• External memory: USB
• Internal memory: W1 ~ W15
• Reference waveform A, B
• External memory: USB
• External memory: USB
• External memory: USB
Page 84