Saving All ( Panel Settings, Display Image, Waveform ) - Promax OD-405 Manual De Instrucciones

USER'S MANUAL. OD-405/410B/411/415
2. Press the Save / Recall key twice to access the Save menu.
3. Press Save Image.
4. Press Ink Saver repeatedly to invert the background color (on) or not
(off).
Note: Destination is set as USB. This cannot be changed.
5. Press Save to confirm saving. When completed a message appears
at the bottom of the display.
NOTE: The file will not be saved if the power is turned off or the USB
flash drive is removed before completion.
File utilities
To edit the USB drive contents (create/ delete/ rename files and folders),
press File Utilities.

5.11.4 Saving all ( Panel settings, display image, waveform )

Procedure
1. (For saving to USB flash drive) Insert the USB flash drive into the
front panel USB port.
2. Press the Save / Recall key twice to recall the SAVE menu.
3. Press Save All. The following information will be saved.
Setup file
(Axxxx.set)
Display image
(Axxxx.bmp)
Page 87
Two types of setups are saved: the current panel
setting and the last internally saved settings (one of
S1 ~ S15).
The current display image in bitmap format.
11-2011