Recalling A Reference Waveform To The Display - Promax OD-405 Manual De Instrucciones

Trigger
Utility
These values are the followings:
OD-411/OD-415
Acquisition
Channel
Cursor
Display
Horizontal
Math
Measure
Trigger
Utility

5.12.2 Recalling a reference waveform to the display

Procedure
1. The waveform must be stored previously.
2. Press Save / Recall repeatedly until you see the menu RECALL.
3. Press the function key F5.
11-2011
Type: Edge
Mode: Auto
Coupling: DC
Noise Rejection: Off
SaveImage, InkSaver Off
Mode: Normal
Coupling: DC
BW limit: Off
Source: CH1
Vertical: None
Type: Vectors
Graticule:
Scale: 2.5 µs/Div
H Pos Adj: Fine
Type: + (Add)
Position: 0.00 Div
Item: Vpp, Vavg, Frequency, Duty cycle, Rise Time
Type: Edge
Mode: Auto
Coupling: DC
Noise Rejection: Off
SaveImage, InkSaver On, Probe squarewave 1kHz
50%duty.
USER'S MANUAL. OD-405/410B/411/415
Source: Channel1
Slope:
Rejection: Off
Invert: Off
voltage: x1
Horizontal: None
Accumulate: Off
Mode: Main Timebase
Hor Pos: 0
Channel: CH1 + CH2
Unit/Div: 2V
Source: Channel1
Slope:
Rejection: Off
Page 90