X-Y Mode - Promax OD-405 Manual De Instrucciones

USER'S MANUAL. OD-405/410B/411/415
5.6.4.5

X-Y mode

The X-Y mode compares the voltage of Channel 1 and Channel 2
waveforms in a single display. This mode is useful for observing the phase
relationship between the two waveforms.
Procedure
1. Connect the signals to channel 1 (X-axis) and channel 2(Y-axis).
2. Make sure both Channel 1 and 2 are activated.
3. Press the Horizontal key.
4. Press XY. The display shows two waveforms in X-Y format; Channel
1 as X-axis, Channel 2 as Y-axis.
Example:
Main mode
Page 63
XY mode
XY mode
Figure 21.-
11-2011