Vertical Cursors - Promax OD-405 Manual De Instrucciones

-V (OD-405/410B)
V/A (OD-411/415)
M1: dB (OD-411/415) Position of the left cursor in dB.
M2: dB (OD-411/415) Position of the right cursor in dB.
∆: dB (OD-411/415)
Div: (OD-411/415)
Cursors adjustment
To move the left cursor press X1, and the use the Variable [3] knob.
To move the right cursor, press X2, and then use the Variable [3] knob.
To move both cursors at once, press X1 X2, and then use the Variable
[3] knob.
Press Cursor to remove the onscreen cursors.

5.2.2 Vertical cursors

Measures
To make measures follow these steps:
1. Press Cursor key.
2. Press X <-> Y to select vertical (Y1&Y2) cursor.
3. Press Source repeatedly to select the source channel.
Range: CH1, 2,MATH.
4. The cursor measurement results will appear in the menu.
11-2011
USER'S MANUAL. OD-405/410B/411/415
The voltage difference. (X1 - X2)
The voltage/current difference from X1 and X2.
The dB difference between M1 and M2.
The frequency per division.
Page 44