Cleaning After Installation; Notes On Cleaning; Control Drawing - Mettler Toledo IND560x Manual De Instalación

3.13.

Cleaning After Installation

3.13.1.

Notes on Cleaning

To clean the IND560x terminal's keypad and cover:
3.14.

Control Drawing

The Control Drawing, 72191600, is included in Appendix A, Control Drawing.
64061929 | 11 | 07/2017
AVOID ELECTROSTATIC CHARGING BY WEARING SUITABLE WORKING CLOTHES WHEN OPERATING IN
HAZARDOUS AREAS.
• Gently wipe the IND560x terminal's keypad and cover with a clean, damp, soft cloth.
•
Use water or mild, non-abrasive cleaning agents.
• Do not use any type of acids, alkalis or strong industrial solvents such as toluene or
isopropanol (IPA) that could damage the terminal's finish.
•
Do not spray cleaner directly on the terminal.
• Do not clean the terminal using high-pressure or high-temperature water.
•
Build-up of dust layers must be avoided.
•
Remove light dust deposits using a damp cloth with a gentle wiping motion.
• Do not use compressed air or vacuum to remove dust layers.
• Follow good housekeeping practices to keep the terminal clean.
WARNING
METTLER TOLEDO IND560x Installation Manual 3-45