Tabla de contenido
Publicidad
INSTRUMENTS
INSTRUMENT COWL
$% 88.20.02
Remove
1. Remove steering column nacelle.
1. Remove steering column nacelle.
+
STEERING COLUMN NACELLE, page 57-9.
2. Remove 4 screws securing instrument cowl to fascia.
2. Remove 4 screws securing instrument cowl to fascia.
3. Release cowl from fascia.
3. Release cowl from fascia.
4. Disconnect multiplugs from dimmer resistor and
4. Disconnect multiplugs from dimmer resistor and
door mirror selector switch.
5. Remove cowl.
5. Remove cowl.
6. Remove dimmer and mirror switch from cowl.
6. Remove dimmer and mirror switch from cowl.
Refit
1. Fit dimmer and mirror switch to cowl.
1. Fit dimmer and mirror switch to cowl.
2. Position cowl and connect multiplugs.
2. Position cowl and connect multiplugs.
3. Position cowl to fascia and secure with screws.
3. Position cowl to fascia and secure with screws.
4. Fit steering column nacelle.
4. Fit steering column nacelle.
+
STEERING COLUMN NACELLE, page 57-9.
88-2
REPAIRS
OIL TEMPERATURE GAUGE
$% 88.25.02
Remove
1. Remove centre console panel.
1. Remove centre console panel.
+
CENTRE CONSOLE PANEL, page 76-4-7.
2. Remove 2 screws securing gauge to console.
2. Remove 2 screws securing gauge to console.
3. Remove retaining bracket, gauge and 'O' ring.
3. Remove retaining bracket, gauge and 'O' ring.
Refit
1. Position 'O' ring and gauge to console.
1. Position 'O' ring and gauge to console.
2. Fit retaining bracket and secure with screws.
2. Fit retaining bracket and secure with screws.
NOTE: Ensure correct orientation of gauge in console.
3. Fit centre console panel.
3. Fit centre console panel.
+
CENTRE CONSOLE PANEL, page 76-4-7.
Publicidad
Tabla de contenido
