MG TF 2008 Manual De Servicio página 474

Tabla de contenido

Publicidad

ELECTRICAL
BBUS SOUNDER
$% 86.77.13
Remove
1. Open front luggage compartment.
1. Open front luggage compartment.
SP860278
2. Remove 2 security shear bolts from BBUS cover.
2. Remove 2 security shear bolts from BBUS cover.
3. Remove cover.
3. Remove cover.
SP860279
4. Disconnect BBUS multiplug.
4. Disconnect BBUS multiplug.
5. Remove nut securing BBUS to bracket and remove
5. Remove nut securing BBUS to bracket and remove
BBUS.
Refit
1. Position BBUS to bracket and secure with nut.
1. Position BBUS to bracket and secure with nut.
2. Connect multiplug.
2. Connect multiplug.
3. Fit BBUS cover and secure with new shear bolts.
3. Fit BBUS cover and secure with new shear bolts.
4. Close luggage compartment.
4. Close luggage compartment.
86-22
REPAIRS
VOLUMETRIC SENSOR
$% 86.77.29
Remove
1. Position both seats fully forward and position seat
1. Position both seats fully forward and position seat
squab forward.
2. Remove 3 screws securing rear bulkhead finisher to
2. Remove 3 screws securing rear bulkhead finisher to
rear bulkhead and collect 3 studs.
3. Release finisher from 6 clips and position aside.
3. Release finisher from 6 clips and position aside.
4. Disconnect multiplug from sensor.
4. Disconnect multiplug from sensor.
5. Remove 2 screws securing sensor to rear console.
5. Remove 2 screws securing sensor to rear console.
6. Remove sensor.
6. Remove sensor.
Refit
1. Fit sensor to console and secure with screws.
1. Fit sensor to console and secure with screws.
2. Connect multiplug.
2. Connect multiplug.
3. Locate bulkhead finisher and engage clips.
3. Locate bulkhead finisher and engage clips.
4. Fit studs and secure with screws.
4. Fit studs and secure with screws.
5. Return seats to original position.
5. Return seats to original position.

Publicidad

Tabla de contenido
loading

Tabla de contenido