Safety Instructions For Electrical Installation; Safety Instructions For Operation; Returning Devices - ABB Sensyflow FMT500-IG Instrucciónes De Puesta En Marcha

Safety
1.7

Safety instructions for electrical installation

The electrical connection may only be made by authorized specialist personnel according to the
electrical plans.
The electrical connection information in the manual must be observed; otherwise, the electrical
protection type may be adversely affected.
Ground the measurement system according to requirements.
1.7.1

Safety instructions for operation

Warning
Touching the surface can lead to burns if the measuring media are hot.
This can result in severe injuries or death.
Do not touch.
Warning
If the measuring medium is allowed to escape in an uncontrolled manner, this can result in
severe injuries or death.
Check pipelines and gaskets on a regular basis.
1.8

Returning devices

Use the original packaging or a secure transport container of an appropriate type if you need to
return the device for repair or recalibration purposes. Fill out the return form (see the Appendix)
and include this with the device.
The EU Directive governing hazardous materials dictates that the owners of any hazardous
waste are also responsible for disposing of it.
All devices delivered to the manufacturer must be free from any hazardous materials (acids,
alkalis, solvents, etc.).
Pipe components and flowmeter sensors contain hollow spaces. If they have been used in
conjunction with hazardous materials, they must therefore be rinsed out in order to neutralize
any such substances.
The owner will be charged for any costs incurred as a result of the device not having been
adequately cleaned or of any failure to dispose of hazardous materials. The manufacturer
reserves the right to return a contaminated device.
Please
Please contact Customer Center Service acc. to page 1 for nearest service location.
10 - EN Sensyflow FMT500-IG CI/FMT500-IG-X1