Profibus Dpv1 Communication With Dp M12 Connector Socket - ABB Sensyflow FMT500-IG Instrucciónes De Puesta En Marcha

Electrical connections
5.1.2

PROFIBUS DPV1 communication with DP M12 connector socket

The version with PROFIBUS DP M12 connector socket allows
disconnection of the device from the bus without interrupting
PROFIBUS DP operation. Instead of the center cable gland an
assembled and wired DP M12 connector socket is supplied.
For connection to the PROFIBUS DP line you need 1 T-plug, cable
socket and cable plug (see accessories).
Type of protection of the plug-in connections: IP 66.
Only available for non-Ex devices in integral mount design.
Please refer to Data Sheet 10/63-6.40 for other versions of T-plugs and
appropriate DP connector plugs.
Pin assignment of the device
Pin Signal
1 VP
2 RxD/TxD-N
3 DGND
4 RxD/TxD-P
5 Shield
Thread Shield
30 - EN
Description
+ 5 V
Receive / transmit data
line A (green wire)
Data transmission potential
Receive / transmit data
line B (red wire)
Shield / protective earth
Shield / protective earth
Sensyflow FMT500-IG
G00833
2
3
5
4
1
G00834
CI/FMT500-IG-X1