Button Functions; Description Of Symbols And Error Message - ABB Sensyflow FMT500-IG Instrucciónes De Puesta En Marcha

8.2

Button functions

The function of the buttons depends on the context and is shown on the display accordingly.
This makes operation and parameterization really easy.
8.3

Description of symbols and error message

An arrow on the left-hand side indicates the relative position within the menu.
During parameterization, a single bar is shown towards the bottom of the display to indicate that
the cursor is in submenu level 1; if it is in submenu level 2, two bars will appear. In the main
menu and in the display modes, no bars are displayed.
In the display modes, the following symbols provide information about the status of the device.
Symbol
-I I-
CI/FMT500-IG-X1
ENTER button
ENTER button
ENTER button
SCROLL button -
+ button
+
ARROW keys
Vertical
Horizontal
< >
Meaning
-II- Connect
Disconnect
O Overflow
* Flashing asterisk
S Simulation
A Alarm
E Error
Sensyflow FMT500-IG
Meaning
- For accessing submenus and input fields
- For confirming entries
- For returning to the previous menu level
For navigating and making selections in the value
range
- For increasing numerical values (increment)
- For changing letters and special characters
Meaning
- For navigating within a menu level
(main menu, submenu level 1, submenu level 2)
- For navigating within an input field (cursor
position)
Description
HART communication active.
No changes can be made to parameters directly on the
device.
HART communication not active.
The measured value cannot be displayed (you may need to
change the display unit), output values are not affected.
Indicates normal operation (measuring mode).
Simulated values and status signals are output instead of
measured values.
Indicates that limit values have been exceeded.
Indicates status signal or diagnostic byte with error. Status
signals, error messages and limit values can be accessed in
the SERVICE MENU.
Operation
EN - 39