Installing The Transmitter (With Remote Mount Design) - ABB Sensyflow FMT500-IG Instrucciónes De Puesta En Marcha

Mounting
4.8

Installing the transmitter (with remote mount design)

With the remote mount design, cable lengths of up to 50 m (164 ft.) (ATEX / GOST
Zone 0 / 1 / 21, FM / CSA and Zone 2/22 versions with constant power method up to 25 m
[82 ft.]) are supported between the flowmeter sensor (sensor) and the transmitter. The
flowmeter sensor is installed in the pipe component / weld-on adapter as described above. The
transmitter is installed on a flat wall surface, taking into account the maximum permissible
ambient temperatures.
Fig. 17: Dimensions in mm (inches). Wall-mounted housing, remote mount design
The sensor and transmitter are connected by means of 10-pin, numbered terminal blocks, which
can be accessed once the covers have been removed from the wall-mounted housing and
sensor terminal box.
26 - EN
Cover in
connection area
Sensyflow FMT500-IG
167 (6,57)
G00860
CI/FMT500-IG-X1