Command
AudioOut4:
AudioOut5:
AudioOut6:
AudioOut7:
AudioOut8:
AudioOut9:
AudioOut10:
AudioOut11:
AudioOut12:
AudioOut13:
AudioOut14:
AudioOut15:
AudioEncode0:
AudioEncode1:
AudioEncode2:
AudioEncode3:
AudioEncode4:
AudioEncode5:
AudioEncode6:
AudioEncode7:
Input Mapping for Teranex 2D
You may choose audio pairs from embedded, AES, analog DB25 or analog RCA inputs to be
mapped to the 16 input channels of the Teranex 2D. You may also mute audio pairs.
Available source values are:
Inputs:
Command Description
Select source to be mapped to output Ch 5.
Select source to be mapped to output Ch 6.
Select source to be mapped to output Ch 7.
Select source to be mapped to output Ch 8.
Select source to be mapped to output Ch 9.
Select source to be mapped to output Ch 10.
Select source to be mapped to output Ch 11.
Select source to be mapped to output Ch 12.
Select source to be mapped to output Ch 13.
Select source to be mapped to output Ch 14.
Select source to be mapped to output Ch 15.
Select source to be mapped to output Ch 16.
Select source to be mapped to Ch 1 of Dolby Encoder
Select source to be mapped to Ch 2 of Dolby Encoder
Select source to be mapped to Ch 3 of Dolby Encoder
Select source to be mapped to Ch 4 of Dolby Encoder
Select source to be mapped to Ch 5 of Dolby Encoder
Select source to be mapped to Ch 6 of Dolby Encoder
Select source to be mapped to Ch 7 of Dolby Encoder
Select source to be mapped to Ch 8 of Dolby Encoder
EmbedPair1 through EmbedPair8
AESPair1 through AESPair4
DB25Pair1 through DB25Pair2
RCAPair
MutePair
Developer Information
109
109