Publicidad
Idiomas disponibles
Idiomas disponibles
Changing Settings using Blackmagic Teranex Setup
The Blackmagic Teranex Setup utility offers an intuitive way to view the status of your
Teranex Processor and provides remote control from any location on your Ethernet network.
This convenient application lets you control your Teranex remotely, away from the front panel.
All your conversion settings can be set
remotely using Blackmagic Teranex Setup.
Getting to Know the Interface
When you launch Blackmagic Teranex Setup, you'll first see the login pane. From here you
can see all your connected Teranex Processors on your network, and you can add more
Teranex Processors if you need to. Open the setup utility by clicking on the 'settings' icon
below the name of your Teranex Processor.
Resizing the Interface
Click and drag the bottom right corner of the login pane to proportionally resize the interface
to best fit your screen size. Alternatively, drag a window edge to resize either vertically or
horizontally.
Selecting a Teranex Processor
The Teranex Setup utility will automatically locate your Teranex processor on your Ethernet
network and will display it by model name in the log in pane. If more than one Teranex
Processor is found, each will be displayed in a separate window. Simply click the arrows in the
right and left screen margins to select the desired processor, then click the icon below the
processor's name to establish a connection.
If your Teranex Processor did not automatically appear, you can add the unit manually using
its IP address. The IP address of your Teranex Processor can be found via the unit's front panel
in the 'system setup menu'. If you need to establish a new IP address, either static or via DHCP,
this can also be done from the front panel. Please refer to the 'system setup menu' section of
this manual for details.
Changing Settings
19 19
Publicidad
Capítulos
