Blackmagic Design BMD-TERANEXEXP12GDL Teranex Express Manual De Instalación Y Funcionamiento página 231

Please note: AudioInPair0: refers to input pair 1, AudioInPair1: refers to input pair 2, etc.
Command
AudioInPair0:
AudioInPair1:
AudioInPair2:
AudioInPair3:
AudioInPair4:
AudioInPair5:
AudioInPair6:
AudioInPair7:
Metadata Commands for Teranex 3D
Available source values are:
Command
Metadata channel mode:
Metadata lfe select:
Genlock
Command
Gen reference:
Line offset:
Pixel offset:
Signal locked:
Type:
Command Description
Select source to be mapped to input pair 1
Select source to be mapped to input pair 2
Select source to be mapped to input pair 3
Select source to be mapped to input pair 4
Select source to be mapped to input pair 5
Select source to be mapped to input pair 6
Select source to be mapped to input pair 7
Select source to be mapped to input pair 8
Command Description
Values are: 32 (3/2 (L,C,R,Ls,Rs)), 20 (2/0 (L/R))
Enables LFE. False=OFF; True=ON
Command Description
For Teranex AV only. Select the Reference Output signal. The
type of output allowed is dependent on the currently selected
output format, the values are: Blackburst, TriLevel.
Set line timing adjustment for external genlock.
Values are within the range set by the current output video
format. (Default = 1)
Set pixel timing adjustment for external genlock. Values are
within the range set by the current output video format.
(Default = 0)
Indicate genlock status. Cannot be changed by the end user.
True indicates that the Teranex processor is locked to the
external reference. False indicates that it is not locked.
Select the Genlock (Reference) source for the device.
For Teranex 2D, 3D and Express, values are: Input, External.
For Teranex AV, values are: Input, External and Internal.
デベロッパーの皆様へ
231 231