After Use - Krups EXPERT Manual Del Usuario

KRUPS RACLETTE - 2016236010
CONNECTION AND PRE-HEATING
Unwind the cord completely.
Plug the cord into the mains - fig.1
Be cautious how you place the cord, so that it does not get in the way of guests moving around the table.
Check that your electric supply is compatible with the power and the voltage indicated under the
appliance.
Earthed product : connect the appliance to a plug with an earth connection.
If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard.
Never leave the appliance plugged in when not in use.
Do not leave the appliance switched on while unattended.
Set the thermostat to the max position, the indicator will light up - fig.2
Allow appliance to pre-heat for 15 minutes without the trays.
On first heating there may be a slight odour or smoke - this is normal and will quickly disappear.
COOKING
After pre-heating, the appliance is ready to be used :
For the raclette function, have each guest place a slice of cheese in their individual tray before placing
it under the grill plate to melt.
Do not leave the trays in the appliance while empty.
The grill plate will cook small strips of meat on your accompaniments (bacon, mushrooms, onions, prawns,
small sausages...). On the griddle plate, you can also make pancakes ad eggs.
You can adjust the thermostat during cooking according to the desired degree of cooking using the button.
Do not turn over the plate during use.
To avoid damaging the non-stick coating of the grill plate, always use a plastic Krups or wooden utensils.
- fig.3
During first use, the appliance may give off a slight odour and smoke.
If you wish to move the appliance when it is hot, use the plastic side handles, taking care not to touch the
metal - fig.4
Do not touch the metal parts of the appliance while in use; they are very hot.

AFTER USE

Put the thermostat control knob to min. - fig.5
Unplug the cord from the wall socket. - fig.6
Leave the appliance to cool for at least 30 min without touching it.
While it is cooling down, keep the appliance out of the reach of children.
Clean the grill plate, the trays and the base of the appliance with a sponge, hot water and washing
up liquid. - fig.7
The grill plate and the trays can be put in the dishwasher.
Do not use scouring pads or hard abrasive powder to clean any part of the appliance. - fig.8
Never immerse the appliance and the cord in water or in the dishwasher.
STORAGE
Ensure the appliance is cool and unplugged before storing.
Wind the cord around the 2 hooks positioned at the back of the product - fig.9
Replace the grill plate.
Keep the stored appliance out of the reach of children.
If you have any problems or queries consult our website - www.krups.co.uk
16
31/08/06 11:36 Page 17