Configuring Camera Motion Detection Settings - Lorex L23WD800 Serie Manual Del Usuario

Configuring Camera Motion Detection Settings

Configuring motion settings on your camera allows you to tell the camera to trigger motion
recording in a certain portion of the screen.
To configure the camera motion recording settings:
1. Click the Motion sub-menu (Camera>Motion). The Motion window opens.
Channel Number Selection
Drop-down Menu
Figure 21.4 Motion Settings menu.
2. Under CH No select the channel number from the drop-down menu you wish to configure.
3. Under Sensitivity select sensitivity levels (1~10) from the drop-down menu.
4. Drag your cursor in the Grid Window, of where you wish to increase motion sensitivity. The
grids turn light-blue when you hold down the mouse, and turn light yellow when you release
the mouse.
Figure 21.5 Adjusting motion sensitivity.
Sensitivity drop-down menu
In this example, the area around the van is
highlighted. Once the van moves, it triggers
motion recording.
Movement around the van will not trigger
motion recording.
Highlighted grid area (red box
for illustration purposes only)
Using Web Remote Viewer
Grid Window
99