Misc. Settings; Osd Configuration; Vga Factory Reset Submenu - Lorex L23WD800 Serie Manual Del Usuario

MISC. SETTINGS

Figure 4.12 Misc. settings menu.
Use the Navigation keys on the front panel or
remote control to access the OSD
Configuration or VGA Factory Reset
submenus. Change the values using the arrow
keys and Enter button.

OSD Configuration

Figure 4.13 OSD Configuration menu.
Use the Up, Down, Left and Right arrows to
adjust the settings. Press the Enter button to
set, and the Return button to exit the menu.
• OSD Timer: Set the OSD Timer ON or OFF.
If the timer is set to ON, the menu will
automatically disappear after 30 seconds.
• OSD Position: Determines the position of
the On-Screen Display window. Use the Up,
Down, Left and Right arrows to adjust the
location of the screen. Press the Enter
button to set, and the Return button to exit
the menu.
Figure 4.14 OSD position window.
• OSD Transparency: Set the transparency
for the OSD Menu.
• OSD Zoom: Set the OSD Menu Zoom to ON
or OFF.

VGA Factory Reset Submenu

Use the Factory Reset menu to return the
Monitor settings to factory defaults.
Adjusting Display Settings
25