Sound; Audio; Buzzer - Lorex L23WD800 Serie Manual Del Usuario

Using the System Menu

SOUND

Configure live audio, network audio,
and buzzer settings.
Audio-capable cameras or
NOTE:
self-powered microphones (not included)
must be connected to the system in order
to use listen-in audio (live audio
monitoring).

AUDIO

Use the audio menu to configure live audio and
network audio settings.
To configure live audio settings:
1. Click the SETUP button (
Status Bar.
2. Click SYSTEM SETUP.
3. Click SOUND.
• The Sound window opens.
Figure 12.0 Audio Menu.
4. Under LIVE AUDIO, select ON/OFF to
enable/disable listen-in audio on the
system.
5. Under DEFAULT AUDIO CHANNEL, select
CH1, CH2, CH3, or CH4.
6. Click APPLY to save your settings or select
CANCEL to restore defaults.
To configure network audio settings:
1. Under NETWORK AUDIO TRANSMISSION,
select ON/OFF to enable/disable the
transmission of audio to a remote PC.
60
NOTE:
bandwidth and may affect the transmission
of the video signal. Enable or disable
network audio based on your network
settings.
2. Under DIGITAL AUDIO RECEIVE, select
ON/OFF to enable/disable the reception of
audio from a remote PC.
3. Click APPLY to save your settings or click
CANCEL to restore defaults.

BUZZER

Use the Buzzer menu to control the "beep"
from the system when you press a button on
the remote control or front panel.
) in the
Figure 12.1 Buzzer Menu.
To enable/disable the system buzzer:
1. Click the BUZZER tab on the left.
2. Under KEYPAD, click
OFF.
3. Click APPLY to save your settings or click
CANCEL to restore defaults.
4. Click CLOSE to exit.
Network audio will consume more
to select ON/