Front Panel - Lorex L23WD800 Serie Manual Del Usuario

FRONT PANEL

1 2
Figure 1.0 Front panel view (16-channel model shown).
LED Indicators
1. :
NET
• : Flashes green during network activity.
ALM
• : Flashes orange when a system alarm triggers.
PWR
• : Glows solid red to indicate that the system is on.
REC
• : Glows solid red when system records.
Channel buttons
2. : Press to view desired channel in full screen mode.
+10
• : Press to select channels 11 and greater (in 16-channel configurations only). For example, to select
+10
channel 11, press
+10
• Press and hold the
Navigation cursor / Enter button
3.
Enter button to confirm a menu selection.
SETUP
4. : Opens the system Setup menu.
DISPLAY
5. : Opens the system display mode. Use the Navigation Cursor to select display type.
MODE
6. : Opens the Mode menu. Select from DVR,Computer Monitor (DVI), Component and Demo Video.
SEARCH
7. : Opens the Search menu.
ZOOM
8. : Zooms into the selected channel. Channel must be selected before pressing
IR Sensor
9. : Infrared (IR) sensor for the remote control.
USB Ports
10. : Insert USB mouse or USB memory key for firmware upgrades or video backup.
RETURN
11. : While in a menu, press
• Press to open the System Information window (in viewing mode)
3
1
and .
button to start the demo video.
: Use the direction cursors to navigate system menus. Press the
RETURN
to cancel a selection or return to a previous menu.
High Resolution Display
Control Panel
6 8
4 5 7
11 12 13
ZOOM
9 10
14
.
3