Display Control Sub Menu - Lorex L23WD800 Serie Manual Del Usuario

DISPLAY SETTINGS
Figure 4.4 Display menu.
Use the Arrow keys on the front panel or
Remote Control to select from Auto
Configuration, Phase, Clock or Highlight
Window. Use the enter key to access the
Display Control or Scheme submenus. Change
the values using the arrow keys and the Enter
button.
• Auto Configuration: Select Auto
Configuration to allow the system to set
the configurations of the monitor. Select
YES to allow the system to set the color, or
NO to exit.
• Phase: Set the phase for the system.
• Clock: Set the internal clock for the system.

Display Control sub menu

Figure 4.5 Display control menu.
• Aspect Ratio: Set the Aspect Ratio
• for the monitor.
• Display Image: Sets the image display to
Auto or Manual.
Adjusting Display Settings
• Display Image: Sets the image display to
Auto or Manual.
• Display Position: Adjust the Horizontal and
Vertical screen positioning.
Figure 4.6 Display position.
• Zoom: Zoom the monitor display In or Out.
Use the Set the Zoom Position option to
change the location for the Zoom control.
Figure 4.7 Zoom menu.
• Scheme: Use the scheme controls to
manually adjust the Red, Yellow, Green,
Cyan, Blue and Magenta colors of the
monitor.
Figure 4.8 Color control menu.
23