Configuring Panic Recording Settings - Lorex L23WD800 Serie Manual Del Usuario

Tabla de contenido

Publicidad

4. Under the Frame Rate drop-down menu, select the desired frame rate for the specific
channel.
• Frame Rate choices (in FPS) are: 1, 2, 3, 7, 15, 30.
• The far-right column, under FPS, shows you how many FPS you have remaining.
5. Under the Quality drop-down menu, select the desired video quality for the specific channel.
• Quality setting choices are: Super, Highest, High, Medium, Low.
6. Under the Audio drop-down menu, select ON or OFF to enable or disable audio in a specific
channel.
7. Under the Alarm drop-down menu, select the alarm you wish to activate (Alarms 1~4).
8. Click OK to save your settings.

Configuring Panic Recording Settings

To configure Panic Recording Settings:
1. Click the Panic sub-menu on the navigation bar on the left (Record>Panic). The Panic
Recording Setting window opens.
Figure 23.3 Panic Recording Setting window.
2. Under the Resolution drop-down menu, select the desired resolution for the specific
channel.
• The Resolution choices are: 352 x 240, 704 x 240, 704 x 480.
3. Under the Framerate drop-down menu, select the desired frame rate for the specific
channel.
• Frame rate choices (in FPS) are: 1, 2, 3, 7, 15, 30.
• The far-right column, under FPS, shows you how many FPS you have remaining.
4. Under Quality, select the quality of video during panic recording for the specific channel.
• Quality setting choices are: Super, Highest, High, Medium, Low.
5. Under Audio, select ON or OFF to enable or disable audio for the specific channel.
6. Click OK to save your settings.
109

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

L23wd1600 serie

Tabla de contenido