Configuring Display Settings - Lorex L23WD800 Serie Manual Del Usuario

Tabla de contenido

Publicidad

Using Web Remote Viewer
5. Click the Select All button to highlight the entire grid or;
• Click the Reverse All button to reverse the grid area selection.
• Click the Delete All button to delete all highlighted areas in the grid.
6. Click OK to save your settings.

Configuring Display Settings

Adjusting OSD (On Screen Display) Settings
To configure OSD settings:
1. Click Display on the navigation bar on the left. The OSD Settings window opens.
Figure 22.0 OSD Setting window.
2. Under the Status Bar Timeout drop-down menu, select the duration of when the status bar in
the DVR menu "hides" or times out.
• The Status Bar Timeout choices are: Always, 5 seconds, 10 seconds, 15 seconds, 20 seconds,
30 seconds, 1 minute.
3. Under the Camera Title drop-down menu, select ON or OFF to toggle the camera name
display on or off when viewing video.
4. Under the Recording Mode Icon drop-down menu, select ON or OFF to toggle the recording
mode icon on or off when viewing video.
5. Under the Border drop-down menu, select ON or OFF to toggle a border around a viewing
window when a window is clicked.
6. Under the Border Color drop-down menu, select the color you want the border to be.
• Border Color choices are: White, Gray, Yellow, Blue, Green, Red.
7. Under the Motion Sensor Display drop-down menu, select ON or OFF to turn the motion
sensor display on or off.
8. Under the Motion Color drop-down menu, select the color the grid turns when the DVR
detects motion.
• Color choices are: Yellow, Blue, Green, Red.
100

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

L23wd1600 serie

Tabla de contenido