Enabling Easy Connect On Your System; Creating An Easy Connect Account - Lorex L23WD800 Serie Manual Del Usuario

Enabling Easy Connect on your system

By default, Easy Connect (Yoics Enabled) is "ON".
To enable Easy Connect:
1. Click the SETUP button (
2. Click SYSTEM SETUP.
3. Click NETWORK.
• The Network window opens.
Easy Connect tab
Figure 26.0 Enabling Easy Connect.
4. Click the EASY CONNECT tab on the left.
5. Under YOICS, click
6. Click APPLY to save your settings.

Creating an Easy Connect Account

To register your DVR with Yoics:
1. Go to http://lorex.yoics.com
an account.
There is no "www" in front of the address.
NOTE:
Figure 26.1 Creating a Easy Connect account.
) in the Status Bar.
to select ON.
and register for
Remote Viewing Using Lorex Easy Connect
Select ON
You must connect your DVR to a router
connected to the internet before
registering a Yoics account.
The DVR and computer must be connected
to the SAME network . This ensures that
upon account activation, Easy Connect will
detect your system.
Click Register
after you complete
the form.
121