Ptz - Lorex L23WD800 Serie Manual Del Usuario

Using the System

PTZ

Use the PTZ menu to control any PTZ (Pan, Tilt, Zoom) cameras (not included) connected to your
system. For details on connecting PTZ cameras, see "Appendix F: Connecting PTZ Cameras" on
page 153.
To open the PTZ menu:
1. Click on the channel with a PTZ camera.
2. Click the PTZ button in the status bar.
• The PTZ menu opens.
3
5
7
Figure 5.11 Zoom frame (full-screen only).
1. CAM: Select a different channel.
2. PRESET: Select preset number ( 1~255). For details on setting Presets on your PTZ camera,
see "Configuring PTZ Presets" on page 154.
3. SET: Save a preset.
4. GO TO: Go to a saved preset position.
5. Pan/Tilt Navigation:
• : Tilt camera up/down
• : Pan camera left/right
6. ZOOM/FOCUS/IRIS: Increase or decrease Zoom, Focus and Iris focusing.
7. PARAMETER: Opens the Parameter menu (see figure 5.9).
8. OK: Close the PTZ menu.
For details on connecting a PTZ camera to your system, see "Appendix F: Connecting PTZ
Cameras" on page 153.
32
1
2
4
PTZ Parameter Menu (full-screen only)
6
8
• The PTZ Parameter
menu displays the
current settings of you
PTZ camera (Zoom
speed, Focus speed,
Iris speed, Pan/Tilt
speed, Auto Focus on/
off, Auto Iris on/off)
OK
• Click to exit