Step 2: Enter Your Router Settings - Lorex L23WD800 Serie Manual Del Usuario

Lorex Auto Port Forwarding Wizard

Step 2: Enter your router settings

1. Under the Router drop-down list, select the model of your router.
OR
• Click the Search button (
NOTE: Click the Auto Detect button (
most Linksys or Netgear models).
Router drop-down list
Router IP
Router user name &
password
Figure 28.6 Router settings window.
2. Under Router IP, click the Detect Router IP button (
• The router's IP populates in the blank field. Click OK to exit the prompt.
3. Under Username and Password, enter
• Optional: Under HTTP Type (default http://) and HTTP Port (default, 80), you may have to
change the values depending on your router model. Consult your router manual for details.
Figure 28.7 Router settings window.
4. Under IP, enter the IP address of your Lorex device.
• To find your system IP, exit to the main viewing mode, and then press the INFO button on your
remote, or press the RETURN button on the front panel of the system.
5. Under Port, enter the Web Port (80). Under 2nd Port, enter the RTSP port (554).
6. Click Next to continue.
130
) to enter the name of your router model.
)if you have a Linksys or Netgear router (works with
80
554
the router's username and password.
Enter your Lorex
device's IP
Search and Auto detect
button
Enter port
Ports
Enter port
2nd Port
).
80
under
554
under
Enter port
number