Starting The Oven - Moretti Forni T Serie Manual Instrucciones

before changing it you are advised to try various temperature and
time parameters on the control panel).
For more even results, we recommend avoiding the use of
temperatures above those recommended for the type of product being
baked.
3.2 STARTING UP
IMPORTANT!
- Never allow unauthorised persons to approach the oven.
- Take particular care never to touch moving parts with your
arms, hair, bracelets, rings, tools, clothing, etc. or with any parts
that might become hooked up, because in spite of the low speed
at which the conveyor belt turns there is a risk of being dragged
and crushed by movement of the belt itself.
- In particular, bear in mind that the glass in the front door, the
adjustable side walls and the conveyor belt heat up when the
oven is in use, and must never be touched to avoid burning; when
a number of chambers are fitted on top of each other, the upper
chambers may heat up, so you should never touch the outer walls
to avoid burning.
The three parameters to be set for cooking are: the ceiling
temperature, the floor temperature, the cooking time (time it takes the
pizza to travel through the baking chamber, which is directly
dependent on the belt speed).
It is possible to store up to 20 different cooking programs, which can
be called up and/or modified at any time.
The "Economy" or energy saving function
pauses in cooking, while the "Lock" function allows to block a series
of operations so that the appliance can be used also by untrained
personnel. The "Timer" (only-T75E T97E - TT98E), allows the oven
to be turned on at different times for each day of the week.
SETTING LANGUAGE (only T75E-T97E-TT98E):
To set the language, press the "left arrow" and "up arrow" keys
simultaneously, then select the language you require using the up and
down arrows;
press OK to confirm.
The control unit can be set to display temperature in Centigrade or in
Fahrenheit.See point 5.13 on how to change the setting.
3.2.1 SCREEN
T75E-T97E-TT98E (fig.28):
The T75E-T97E is switched on by turning the switch (fig.14 item N)
to position "1"; the TT98E is switched on by pressing a button
(fig.14 item R).
The control panel lights up and, after a few seconds, during which
the Manufacturer's device is displayed, a screen like the one
illustrated in fig. 28 appears.
NOTE: If the emergency mushroom head button has been
pressed (fig.14 item O ) it will remain pressed in the safety
position, and will not allow the appliance to be turned back on
again. To unlock the safety button, turn it anticlockwise
1) date and time
2) ceiling set point temperature
3) working mode ( manual or program)
4) indication of the Lock function status
5) cooking time ( time the pizza takes to pass through the oven)
6) indication of the belt status
7) indication of the Economy function status
8) indication of the Timer function status
9) floor set point temperature
10) floor temperature
11) ceiling temperature
At the top left (black on white) the date and time; again at the top but
slightly further right, indication of the current working mode (manual
or program) and the lock icon indicating whether or not the Lock
function is enabled.
Immediately below two distinct areas divide the screen in half. On
the left hand side are the ceiling and floor temperature values, both
set point and actual temperature.
The icons representing the ceiling and floor heating elements are
completely white when the heating elements are off; they turn black
according to the power being used.
On the right hand side of the screen the elements displayed will vary
according to the situation, but generally speaking they will always
can be used during
UK/4
include the cooking time (crossing time) and the belt icon (in three
different conditions: moving, stopped, cooking or preheating).
Più sotto ancora: on the left hand side the Manufacturer's device, on
the right hand side two indications: that showing the Timer status and
that showing whether or not the «Economy» function has been
enabled.
See point 5.14 on how to adjust the screen contrast, if necessary.
T64E (fig.29b):
The oven is turned on by setting the main switch (fig.29b item E) to
position "1" .
When turned on, the control panel will identify the following
parameters:
A- ceiling temperature
B- floor temperature
C- set cooking time
D- status display, for displaying the status of the equipment or of any
abnormalities detected
3.2.2 KEYBOARD
(T75E-T97E - TT98E fig.29, T64E Fig. 29b) :
The following keys are located alongside the monitor, and details of
their uses will be given later in the manual:
12) up arrow / +
13) down arrow / -
14) right arrow
15) left arrow
16) OK button
17) Start/Stop button
18) button Timer (T75E-T97E-TT98E) ,
key programming P/ Hotkey (T64E)
19) Economy button
20) Lock button
Models only T75E-T97E-TT98E are also present:
21) programming button P
22) program button P1
23) program button P2
24) program button P3
25) program button P4
3.2.3

STARTING THE OVEN

When switched on, the control panel will first show the initial screen
complete with the settings for the last baking operation carried out (
T75E-T97E-TT98E fig.28, T64E Fig. 29b ).
T75E-T97E-TT98E:
The previous cooking mode is indicated at the top right:
If you wish to start cooking, press the "Start" button (unless there is
an indication of the maximum difference allowed between ceiling
and floor, see paragraph 3.2.18 in this regard).A message will appear
on screen requesting confirmation with OK, after which the heating
elements, the belt and the fan inside the oven will start. The icon on
the monitor representing the belt will start to move, and wavy lines
indicating the oven heating phase will be displayed; this icon will
continue to be displayed until the oven reaches the required set point
temperature.
NOTE: The floor and ceiling temperatures are constrained to
each other within a range of 20°C (T75E-T97E) or 15°C (TT98E)
to guarantee that the cooking temperature is reached. It is
possible to remove this restriction at the operator's discretion,
but outside a range of 20°C (T75E-T97E) or 15°C (TT98E) it is
no longer possible to guarantee that the set temperatures will be
reached (see point 3.2.18).
T64E:
The display (figure 29b item D) will show previous cooking mode:
manual or preset program.
If you wish to start cooking, press the "Start" button (fig.29b item
17) after which the heating elements, the belt and the fan inside the
oven will start (fig.29b item D). A message will appear on screen
with "HEAT" which flashes until the set point temperature is
reached. If the set point temperature is reached, a message will
appear on screen with "GO" after which you can start cooking. The
dot in the temperature display indicates if power is supplied.
NOTE: The temperatures of the ceiling and floor (not
constrained to one another) can have a maximum gap range of