Chapter 9 Troubleshooting; No Display On The Screen; No Blood Pressure And Pulse Oxygen Measures; Blank Printing Paper - Gima 35132 Manual De Uso

9.1 No Display on the Screen

Shut down the machine and unplug the power. Use a universal meter to check if the outlet has proper voltage, if
the power cable is in good condition, and if the power cable is properly connected with this apparatus or outlet.
Remove the fuse from the back cover of this machine, and make sure it is in good condition.

9.2 No Blood Pressure and Pulse Oxygen Measures

1. Check if the blood pressure cuff is properly wrapped around the arm according to the operating
instructions, if the cuff leaks, and if the inlet is closely connected with the NIBP jack on the side panel.
Check if the indicator of the pulse oxygen probe flashes and if the pulse oxygen probe is properly
connected to the SpO
2. If the problems still exist, please contact the local dealer.

9.3 Blank Printing Paper

1. Check whether the printing paper is installed with its face reversed. Please reinstall it and let the sensitive
page face upward.
2. If the problems still exist, please contact the local dealer.

9.4 System Alarm

1. When the parameter value is higher or lower than the alarm limits, the alarm will ring. Please check
whether the alarm limit value is proper or the condition of the patient.
2. Probe off. Please check the connection of the probes.
Note: In case of trouble of this machine in the service, follow the instructions below to eliminate the problem
first. If the attempt fails, contact the dealer in your local area or the manufacturer. Do not open the cabinet
without permission.
User Manual for Vital Signs Monitor

Chapter 9 Troubleshooting

jack on the side panel.
2
62