Technical Parameters; Environment Protection - GRAPHITE 58G950 Instrucciones De Uso

Remove wire (i) from the ignition plug.
Put on plug key (included) and unscrew the ignition plug (fig. Z).
Clean and adjust spacing between contacts (0.65 mm) (replace ignition plug when necessary).
OTHER INSTRUCTIONS
Ensure there are no fuel leaks, loosened joints or damages of main parts, especially main handle joints and
guide bar fixing. When you find any damage, make sure it is repaired before next use of the chain saw.
All faults should be repaired by service workshop authorized by the manufacturer.
RATED PARAMETERS
Parameter
Engine displacement
Guide bar working length
Engine power
Max. Engine speed with cutting system (maximum)
Idle rotational speed
Average fuel consumption
Fuel – petrol : oil for 2-stroke engines
Fuel tank capacity
Chain oil tank capacity
Carburettor
Ignition system
Ignition plug
Oil feed system
Chain wheel (teeth x pitch)
Type of guide bar
Size of guide bar
Type of chain
Chain pitch
Chain thickness
Dimensions (LxWxH) (w/o guide bar)
Weight (w/o guide bar and chain)
Year of production
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure: Lp = 95 dB(A) K = 3 dB(A)
A
Sound power: Lw = 115 dB(A) K = 3 dB(A)
A
Vibration acceleration a = 0,5 m/s
h
Do not dispose of combustion engine driven products with household wastes, they should be utilized in proper plants. Obtain
information on waste utilization from your seller or local authorities. Worn out equipment contains substances active in natural
environment. Unrecycled equipment constitutes a potential risk for environment and human health.
* Right to introduce changes is reserved.
"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa
Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies, schemes,
drawings and layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright and Related
Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments).
Copying, processing, publishing, modifications for commercial purposes of the entire Instruction or its parts without written permission of
Grupa Topex are strictly forbidden and may cause civil and legal liability.

TECHNICAL PARAMETERS

Petrol Chain Saw
2 2
K = 1,5 m/s

ENVIRONMENT PROTECTION

32
Value
25,4cm 3
250 mm
0,9 kW (1,2 KM)
-1
10500 min
3000 min -1
0,95 l/h
25: 1
230 ml
160 ml
MC14A6-3
CDI
L7T
Automated pump with controller
6T x 9,525 mm
With chain toothed wheel
GRAPHITE 12'' (300 mm)
Oregon 3/8 0,050
3/8" (9,525 mm)
0,050" (1,27 mm)
270x235x225 mm
3,2 kg
2016