Civco ACCUCARE Manual Del Usuario página 172

English
TABLE 4
RECOMMENDED SEPARATION DISTANCES BETWEEN PORTABLE AND MOBILE RF COMMUNICATIONS EQUIPMENT AND THE EX
The EX3 Stepper is intended for use in an electronic environment in which radiated RF disturbances are controlled. The customer or the user of the EX3
Stepper can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment
(transmitters) and the EX3 Stepper as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output power of
transmitter
(W)
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance
equation applicable to the frequency of the transmitter, where
transmitter manufacturer.
NOTE: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects
and people.
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
d = 1.2
0.12
0.37
1.2
3.8
12
is the maximum output power rating of the transmitter in watts (W) according to the
P
8
(m)
80 MHz to 800 MHz
d = 1.2
0.12
0.37
1.2
3.8
12
in metres (m) can be estimated using the
d
EX3 Stepper
3
STEPPER
800 MHz to 2,5 GHz
d = 2.3
0.23
0.73
2.3
7.3
23