Mounting The Profile Plate And The Control Console; Cable Connections - Festo MPS 400 Serie Instrucciones De Utilizacion

Joining station – Operating instructions

12.3 Mounting the profile plate and the control console

12.4 Cable connections

34
1 Profile plate
2 T-head nut, M6-32 (4 ea.)
3 Trolley
4 Serrated washer, J6.4 (4 ea.)
5 Washer, B-6.4 (4 ea.)
6 Socket head screw, M6x10 (4 ea.)
7 Self-tapping screw, 3.5x9 (2 ea.)
8 Control console
1 PLC board to station
When using the SysLink 19" system
plug module: connect socket A to the
SysLink socket on the C interface using
a SysLink cable, or the SysLink socket at
the station's digital I/O terminal.
PLC board to control console
2
When using the SysLink 19" system
plug module: using a SysLink cable,
connect socket B to the SysLink socket
on the control console.
PLC board to power supply
Insert the 4 mm safety plugs into the
sockets on the power supply.
PC to PLC
Connect your PC to the PLC using a
programming cable.
© Festo Didactic 8122168