Checking The Stand - APRILIA ETV mille Caponord 2003 Libro De Uso Y Mantenimiento

ETVmille_ABS_UK.book Page 90 Friday, October 24, 2003 12:25 PM
3
1

CHECKING THE STAND

Carefully read p. 60 (MAINTENANCE)
and p. 97 (CHECKING THE SWITCHES).
The vehicle is provided with two stands:
√ side stand (1);
√ centre stand (2) !.
The stand has two positions:
√ normal or lifted;
√ extended.
It is the rider who must provide for
extending and lifting the stand.
The stand must rotate without hindrances.
The springs (3) provide for keeping the
stand in the desired position (extended or
lifted).
90 use and maintenance ETV mille Caponord ABS
All manuals and user guides at all-guides.com
CENTRE STAND !
◆
Position the vehicle on the side stand,
see p. 58 (POSITIONING THE VEHICLE
ON THE STAND).
◆
The springs (3) must not be damaged,
worn, rusty or weakened.
◆
Make sure that when lifted the stand
presents no slacks.
◆
Move the stand and release it, making
sure that the springs lift it completely.
◆
The side stand must rotate freely, if
necessary grease the joint, see p. 112
(LUBRICANT CHART).
SIDE STAND
◆
Position the vehicle on the centre stand,
see p. 58 (POSITIONING THE VEHICLE
ON THE STAND).
◆
The springs (3) must not be damaged,
worn, rusty or weakened.
◆
Make sure that the stand presents no
slack in either position (extended and
lifted).
◆
Lower the stand, making sure that the
s p r i n g s p r o v i d e f o r e x t e n d i n g i t
completely.
◆
Move the stand to let it up and release it
halfway to make sure that the springs
provide for lifting it completely.
◆
The side stand must rotate freely, if
necessary grease the joint, see p. 112
(LUBRICANT CHART).