Changing The Rear Direction Indicator Bulbs; Changing The Rear Light Bulb - APRILIA ETV mille Caponord 2003 Libro De Uso Y Mantenimiento

ETVmille_ABS_UK.book Page 104 Friday, October 24, 2003 12:25 PM
4 3
1
CHANGING THE REAR DIRECTION
INDICATOR BULBS
Carefully read p. 101 (BULBS).
◆
Position the vehicle on the stand, see p.
58 (POSITIONING THE VEHICLE ON
THE STAND).
◆
Unscrew and remove the screw (1).
!
CAUTION
While removing the protection screen,
proceed carefully in order not to break
the cog.
◆
Remove the protection screen (2).
!
CAUTION
Upon reassembly, correctly position the
protection screen in its seat. Tighten
the screw (1) moderately and carefully,
to avoid damaging the protection
screen.
104 use and maintenance ETV mille Caponord ABS
All manuals and user guides at all-guides.com
2
◆
Press the bulb (3) slightly and rotate it
anticlockwise.
◆
Extract the bulb (3) from its seat.
Insert the bulb in the bulb socket,
making the two bulb pins coincide with
the relevant guides on the socket.
◆
Correctly install a new bulb of the same
type.
If the bulb socket (4) goes out of its
seat, insert it correctly, making the bulb
socket opening coincide with the screw
seat.
!
CAUTION
!
CAUTION
5
CHANGING THE REAR LIGHT
BULB
Carefully read p. 101 (BULBS).
The rear light contains:
√ two parking light/stoplight bulb (5).
To change, proceed as follows:
B e f o r e c h a n g i n g a b u l b , c h e c k t h e
efficiency of the stoplight switches, see p.
97 (CHECKING THE SWITCHES).
5