Changing The Fuses - APRILIA ETV mille Caponord 2003 Libro De Uso Y Mantenimiento

ETVmille_ABS_UK.book Page 98 Friday, October 24, 2003 12:25 PM

CHANGING THE FUSES

Carefully read p. 60 (MAINTENANCE).
!
CAUTION
Do not repair faulty fuses.
Never use fuses different from the
recommended ones.
The use of unsuitable fuses may cause
damages to the electric system or, in
case of short circuit, even a fire.
NOTE
If a fuse blows frequently, there
probably is a short circuit or an overload in
the electric system.
In this case it is advisable to consult an
aprilia Official Dealer.
If an electric component does not work or
works irregularly, or if the vehicle fails to
start, it is necessary to check the fuses.
Check first the 15A secondary fuses and
then the 30A primary fuses.
98 use and maintenance ETV mille Caponord ABS
All manuals and user guides at all-guides.com
1
For the check, proceed as follows:
◆
Turn the ignition switch to position ≈?∆,
to avoid any accidental short circuit.
◆
Remove the fuse box cover, see p. 80
(REMOVING THE FUSE BOX COVER).
◆
Open the cover of the box (1) containing
the secondary fuses.
◆
Extract the fuses one by one and check if
the filament (2) is broken.
◆
Before replacing a fuse, try to find out the
cause of the trouble, if possible.
◆
Replace the damaged fuse with a new
one having the same amperage.
NOTE
If you use one of the spare fuses,
put a new fuse in the proper seat.
◆
Remove the saddle,
( U N L O C K I N G / L O C K I N G
PASSENGER SEAT).
◆
Carry out the operations previously
described for the secondary fuses also
for the main fuses.
NOTE
The removal of the 30A fuses
requires the setting to zero of the following
functions: digital clock.
To reset these functions, see p. 20
(SETTING BUTTONS).
2
see p. 26
T H E