ETVmille_ABS_UK.book Page 95 Friday, October 24, 2003 12:25 PM
REMOVING THE BATTERY
Carefully read p. 94 (BATTERY).
!
CAUTION
With the removal of the battery the
digital clock and the partial kilometre
odometer are set to zero. To set the
cl oc k a g a i n , se e p . 2 0 ( S E T T I N G
BUTTONS).
◆
Make sure that the ignition switch is in
position ≈?∆.
◆
Remove
the
saddle,
( U N L O C K I N G / L O C K I N G
PASSENGER SEAT).
◆
Unscrew and remove the screw (1) on
the negative terminal (–).
◆
Move the negative cable (2) sidewards.
◆
Remove the red protection element (3).
All manuals and user guides at all-guides.com
3
5
◆
Unscrew and remove the screw (4) on
the positive terminal (+).
◆
Move the positive cable (5) sidewards.
Do not force the electric cables.
◆
Unscrew and remove the screw (6),
taking the nut.
◆
Lift the bracket (7) that locks the battery.
◆
Grasp the battery (8) firmly and remove it
from its compartment by lifting it.
see
p.
26
T H E
Once it has been removed, the battery
must be stored in a safe place and kept
away from children.
◆
Position the battery on a flat surface, in a
cool and dry place.
4
8
6
1
2
7
!
CAUTION
!
WARNING
!
WARNING
Upon reassembly, connect first the
positive cable (+) and then the negative
cable (–).
◆
Put back the saddle, see p. 26
( U N L O C K I N G / L O C K I N G
PASSENGER SEAT).
CHECKING THE ELECTROLYTE
LEVEL
Carefully read p. 94 (BATTERY).
T h e v e h i c l e i s e q u i p p e d w i t h a
maintenance-free battery, which does not
require any check of the electrolyte level.
use and maintenance ETV mille Caponord ABS
T H E
95